10% Off Your First Order. Get Offer

FastPlus Abrasives

Sandpaper for Car

Shop purpose-built abrasives with clear grit ranges and formats matched to the job.

20 productsClear grit guidanceFastPlus USA
Sandpaper for Car Explore products →

Shop the collection

20 products

Published June 2026 by FastPlus Abrasives USA β€” fastplus.us β€” Last reviewed: June 2026

πŸ“‹ At a Glance
Topic Automotive sandpaper for car refinishing, body repair & polishing
Audience DIY car enthusiasts, auto body techs, professional body shops
Disc Sizes 6", 3", 1-1/4", 2-3/4" rolls & strips, 9Γ—11" sheets
Abrasive Types Ceramic (PuroFilm), Silicon Carbide, Aluminum Oxide
Compatible Sanders Festool ETS 150, Mirka DEROS, DeWalt DWAS150, hand blocks
Source fastplus.us/collections/sandpaper-for-car
⚑ Key Takeaways
  • The 119-hole FT77 and adaptive FF78 discs last 3–4Γ— longer than standard automotive discs β€” the hole pattern is the reason, not marketing.
  • PuroFilm ceramic cuts faster than aluminum oxide at the same grit. If you're still using AO on primer, you're working harder than you need to.
  • Hook & Loop, PSA, and sheet formats covered β€” works with Festool ETS 150, Mirka DEROS, DeWalt DWAS150, and any standard 6" DA.
  • The BN38 SiC sheets are waterproof and oil-resistant β€” use them wet on clear coat or dry on bare metal, same disc.
  • FF19 foam pads in 6" and 3" let you finish right after sanding without swapping tools or setups.
  • Everything ships from the US. No 3-week wait, no customs surprise.

Most guys shopping for car sandpaper run into the same problem: they grab whatever's on the shelf, burn through discs in an hour, and wonder why the finish looks uneven. The grit is fine β€” the abrasive type and hole pattern are the issue. That's what we built this lineup around.

FastPlus automotive sandpaper for car refinishing

Why the Abrasive Type Actually Matters

Aluminum oxide is fine for wood. On automotive primer and filler, ceramic cuts cleaner, loads less, and lasts longer β€” especially on a DA running at 6,000–10,000 OPM. The PuroFilm backing keeps the abrasive layer flexible enough to follow panel contours without digging in. That's not a spec sheet claim β€” it's what you see after the first panel.

Product Specs at a Glance

Feature Details
Abrasive Options Ceramic (PuroFilm), Blue Ceramic, Silicon Carbide, Aluminum Oxide
Backing Types Tear-resistant film, Hook & Loop (Velcro), PSA, waterproof sheet
Hole Patterns 119-hole (FT77), adaptive multi-hole (FF78), 8-hole, 14-hole strips
Formats Discs, rolls, strips, 9Γ—11" sheets, foam pads β€” all in one lineup
Wet/Dry BN38 SiC sheets rated for both; ceramic discs dry use only

The Full Lineup

πŸ”΅ Sanding Discs

Product Abrasive Backing Use Case
Purple Film FT77 6" 119-Hole – 50 Pack PuroFilm Ceramic Hook & Loop Primer, filler, paint β€” workhorse disc
Adaptive Film FF78 Pro 6" Blue Ceramic – 50pcs Blue Ceramic Film / Hook & Loop Aggressive cut, smooth leave-behind
SpotFix FD8 1-1/4" PSA – 100pcs PuroFilm PSA Stone chips, spot repairs, tight corners

🟑 Foam Polishing Pads

FlexPro FF19 – 6" & 3" β€” Fine foam that actually conforms to body curves instead of riding the high spots. Hook & Loop. Use these right after your final sanding pass β€” no setup change needed.

🟠 Sanding Rolls

Product Size Backing Use Case
Purple PSA Roll F737 2-3/4" Γ— 59ft PSA Cut to length for sanding blocks, long panels
PURO Ceramic Velcro Multi-Hole Roll F737 2.75" Γ— 13ft Velcro / Multi-Hole Hand block sanding with dust extraction

🟒 Sanding Strips

Product Size Holes Use Case
PuroFilm Strips FT77 – 25 Pack 2-3/4" Γ— 7-4/5" 8 holes Edges, curves, door jambs
PuroFilm Strips FT77 – 25 Pack 2-3/4" Γ— 16-1/2" 14 holes Hoods, doors, larger flat panels

βšͺ Wet/Dry Sheets

SiC BN38 9Γ—11" – 10pcs β€” Waterproof, oil-resistant silicon carbide. Use wet on clear coat to level orange peel, or dry on bare metal before primer. Cut to whatever size fits your block.

πŸ”΄ Scuff Pads

SiC & Aluminum Oxide Scuff Pad FNW β€” Good for scuffing between coats, cleaning up rust bloom, or prepping plastic trim before paint. Won't leave deep scratches the way sandpaper can on soft surfaces.

From a Customer

"I bought the Purple Film Sanding Discs FT77 and the FlexPro Foam Discs for DIY sanding and polishing at home. Everything works perfectly β€” the discs and foam pads stick well, cut fast, and the finish is really smooth. Even the small strips are great for tight areas. I feel like a pro doing my own car!"

β€” Jack L., Car Enthusiast

FastPlus customer car refinishing result

Shop All Automotive Sandpaper β†’

Frequently Asked Questions

01 What grit sandpaper should I use for car primer?
For sanding automotive primer, use P80–P120 for heavy material removal, P150–P180 for standard primer leveling, and P220–P320 before topcoat. FastPlus FT77 PuroFilm ceramic discs in these grits cut faster and load less than aluminum oxide on primer surfaces.
02 Can I use FastPlus sanding discs wet?
The ceramic film discs (FT77, FF78) are designed for dry sanding only. For wet sanding, use the FastPlus BN38 Silicon Carbide 9Γ—11" sheets β€” waterproof and oil-resistant, rated for wet sanding clear coat, primer, and bare metal.
03 Are FastPlus discs compatible with Festool ETS 150, Mirka DEROS, and DeWalt DWAS150?
Yes. All FastPlus 6" Hook & Loop discs (FT77, FF78) fit any standard 6" DA sander including the Festool ETS 150, Mirka DEROS, DeWalt DWAS150, and similar orbital sanders with a Velcro backing pad.
04 What is the difference between the FT77 and FF78 sanding discs?
The FT77 uses a 119-hole pattern with PuroFilm ceramic abrasive β€” best for primer, filler, and paint sanding. The FF78 uses an adaptive hole pattern with Blue Ceramic, which cuts more aggressively and suits fast stock removal and featheredge work.
05 What grit for wet sanding clear coat?
Start with P1500–P2000 to level orange peel, then P2500–P3000 before polishing. Use FastPlus BN38 SiC waterproof sheets cut to size with a rubber sanding block and water.
06 How long do FastPlus automotive discs last vs standard discs?
In FastPlus testing, FT77 and FF78 ceramic discs last 3–4Γ— longer than standard aluminum oxide discs. Ceramic self-sharpens under heat, and the multi-hole pattern reduces loading β€” the main reason standard discs wear out fast.
07 PSA vs Hook & Loop β€” which do I need?
PSA discs stick directly to a smooth backing pad β€” used for hand sanding blocks or older DA sanders without Velcro. Hook & Loop attach to a Velcro pad and swap easily. Most modern DA sanders use Hook & Loop.
08 Can I use the sanding rolls and strips with a hand sanding block?
Yes. The PSA rolls (F737, 2-3/4" Γ— 59ft) cut to any length and apply to a flat block. The Velcro multi-hole rolls attach to a Velcro-backed hand block for dust extraction. PuroFilm strips (FT77) in 2-3/4" width fit standard hand blocks directly.

Source: FastPlus Abrasives USA β€” fastplus.us. All specs reflect FastPlus Abrasives USA product testing as of June 2026.