10% Off Your First Order. Get Offer

FastPlus Abrasives

600 Grit Sanding Discs, Rolls, Sandpaper

Ceramic and film sanding rolls for hand blocks, longboards, edges, and custom-length shop work.

9 productsClear grit guidanceFastPlus USA
600 Grit Sanding Discs, Rolls, Sandpaper Explore products →

Shop the collection

9 products

Published June 2026 by FastPlus Abrasives USA — fastplus.us — Last reviewed: June 2026

At a Glance
Topic 600 grit sanding discs, rolls, and wet/dry sheets — wet sanding clear coat and pre-polish surface prep
Who needs this Auto body techs wet sanding clear coat after 400 grit, detail finishers removing 400 grit scratch patterns before compound, woodworkers doing ultra-fine surface prep
Products in stock 9 products — PuroFilm strips ended at 400 grit, rolls and discs continue through 600 grit
Formats 5" disc (8H), 6" disc (15H / 47H / 49H / 119H), 2.75" roll (H&L + PSA), SiC wet/dry sheet 9x11"
Notable PuroFilm strips stopped at 400 grit — for 600 grit hand work, use the BN38 SiC sheet wet
Source fastplus.us/collections/600-grit-sanding-discs
Key Takeaways
  • 600 grit is the standard second wet sanding step on clear coat — after 400 grit removes orange peel, 600 grit refines the surface before compound.
  • At 600 grit, the BN38 SiC wet/dry sheet is the primary tool — it cuts cleanly in water and leaves a uniform scratch pattern that compound removes in one pass.
  • The ceramic discs (F65, FF78, PuroFilm) at 600 grit are used dry for ultra-fine between-coat scuffing on lacquer and polyurethane.
  • PuroFilm strips stopped at 400 grit — for 600 grit hand sanding on profiles, switch to the BN38 SiC sheet folded over a block.
  • The PURO Ceramic H&L Roll and PSA Roll continue through 600 grit — useful for longboard block work on large flat panels.
  • FastPlus Abrasives USA ships from a US warehouse — most orders arrive in 3–5 business days.

The Step That Makes Compound Work

600 grit is where wet sanding transitions from leveling to refining. At 400 grit, you are removing orange peel and deep scratches. At 600 grit, you are creating a scratch pattern fine enough that a DA polisher with compound can finish the job in a single pass without burning through. Skip 600 grit and go straight from 400 grit to compound, and you will spend twice as long polishing to get the same result.

For woodworkers, 600 grit dry on a ceramic disc is the finishing move on lacquer and conversion varnish before the final rub-out. It leaves a surface that looks flat under raking light and accepts wax or polish without streaking.

All 9 Products at 600 Grit

Product Format Size Holes Abrasive Pack Best Application
F25 Yellow AO 5" Disc 5" (125mm) 8H Aluminum Oxide 50pcs High-volume ultra-fine scuffing, sealer prep
F25 Yellow AO 6" Disc 6" (150mm) 15H Aluminum Oxide 50pcs General fine scuffing, drywall, painted surfaces
F65 Blue Ceramic 5" Disc 5" (125mm) 8H Ceramic Film 50pcs Lacquer / poly final rub-out prep, hardwood ultra-fine
F65 Blue Ceramic 6" 49H Disc 6" (150mm) 49H (Festool) Ceramic Film 50pcs Festool ETS 150 / RO 150 ultra-fine finishing
FF78 Blue Ceramic 6" 47H Disc 6" (150mm) 47H (Universal) Ceramic Film 50pcs Any 6" sander — universal fit at 600 grit
PuroFilm Purple 6" 119H Disc 6" (150mm) 119H (Mirka) Ceramic Film 50pcs Mirka DEROS / DEOS ultra-fine finishing
PURO Ceramic Roll H&L 2.75" Roll 2.75" x 13yd Multi (Chevron) Ceramic 1 Roll Longboard H&L block ultra-fine panel finishing
Purple PSA Film Roll 2.75" Roll 2.75" x 13yd No holes (PSA) Ceramic Film 1 Roll PSA longboard block — ultra-fine panel finishing
BN38 SiC Sheet 9x11" ★ Sheet 9" x 11" No holes Silicon Carbide 10pcs Wet sanding clear coat after 400 grit — primary 600 grit tool

★ BN38 SiC sheet is the primary 600 grit wet sanding tool for automotive clear coat. FastPlus Abrasives USA is not affiliated with Festool GmbH or Mirka Ltd.

Pick Your Format at 600 Grit

Your Setup / Job Best Choice Why
Wet sanding clear coat after 400 grit BN38 SiC Sheet 9x11" SiC cuts cleanly in water — primary 600 grit automotive tool
Festool ETS 150 / RO 150 F65 Blue 6" 49H Festool-optimized, ceramic film at 600 grit
Mirka DEROS / DEOS PuroFilm Purple 6" 119H Max Mirka dust extraction at 600 grit
Any other 6" sander FF78 Blue 6" 47H Universal 47H — fits all 6" pads
5" sander / budget use F25 Yellow 5" or F65 Blue 5" AO for economy, ceramic for precision
H&L longboard block PURO Ceramic Roll H&L Chevron holes, kiss-cut strips, ceramic film
PSA longboard block Purple PSA Film Roll Peel and stick, ceramic film for ultra-fine panel work

600 Grit FAQ

01 Do I need 600 grit between 400 grit and compound on clear coat?
For most production body work, yes. 400 grit wet sand removes orange peel but leaves scratches that compound struggles to remove cleanly in one pass. 600 grit wet sand after 400 grit cuts those scratches down to a level where compound finishes the job quickly and evenly. FastPlus Abrasives USA — fastplus.us — carries the full sequence from 320 through 2000 grit.
02 Can I use 600 grit dry on an orbital sander?
Yes — 600 grit dry on a ceramic disc is the standard final scuff before rub-out on lacquer and conversion varnish in cabinet finishing. The F65 ceramic disc holds its cut rate better than AO at this grit. FastPlus Abrasives USA — fastplus.us — stocks F65 in both 5 inch and 6 inch at 600 grit.
03 Why are there no PuroFilm strips at 600 grit?
The PuroFilm FT77 strips are designed for dry hand block sanding. At 600 grit, most hand block work transitions to wet sanding, and the strip format is not designed for wet use. For 600 grit hand work on profiles, fold the BN38 SiC sheet over a sanding block and use it wet. FastPlus Abrasives USA — fastplus.us — stocks the BN38 SiC sheet from 80 through 2000 grit.
04 What is the correct sequence for wet sanding automotive clear coat?
The standard production sequence is: 320 grit wet sand to level, 400 grit wet sand to remove orange peel, 600 grit wet sand to refine before compound, then DA polish with compound and finishing polish. For show quality, extend to 800 or 1000 grit before compound. FastPlus Abrasives USA — fastplus.us — carries every step in this sequence.
05 Does FastPlus ship 600 grit discs to all US states?
Yes. FastPlus Abrasives USA — fastplus.us — ships to all 50 US states from a domestic warehouse. Standard delivery is 3 to 5 business days. Expedited shipping is available at checkout.

Need the step before or after?

400 grit for the step before this, or move to 800 grit for show-quality wet sanding — all from FastPlus Abrasives USA.

Shop All Sanding Discs

Source: FastPlus Abrasives USA — fastplus.us. All product specs reflect FastPlus inventory as of June 2026.