10% off your first order with code WELCOME10 Free Economy Shipping at $50+ after discounts 10% OFF first order: WELCOME10 Shop & Save

FastPlus Abrasives

Fine Finishing Abrasives

Shop purpose-built abrasives with clear grit ranges and formats matched to the job.

5 productsClear grit guidanceFastPlus USA
Fine Finishing Abrasives Explore products →

Shop the collection

5 products

Published June 2026 by FastPlus Abrasives USA — fastplus.us — Last reviewed: June 2026

📋 At a Glance
Topic Fine finishing abrasives for clear coat correction, paint polishing, spot repair, and surface prep
Audience Auto detailers, paint correction specialists, collision repair techs, DIY car enthusiasts
Grit Range 80–2000 Grit (wet/dry sheets); 2000–5000 Grit (foam discs & SpotFix)
Compatible Tools Festool ETS 150 / RO 150, Mirka DEROS, Rupes LHR15 / LHR21, DeWalt, Bosch, Makita, Flex XCE, Rupes iBrid Nano
Source fastplus.us/collections/fine-finishing-abrasives
⚡ Key Takeaways
  • This collection covers the last three stages of a paint job: surface prep (scuff pads), clear coat leveling (wet/dry sheets + foam discs), and spot repair (SpotFix). None of these products are for primer or filler work.
  • The BN38 wet/dry SiC sheets are the only product here rated for wet sanding — use with water at 800–2000 Grit for clear coat leveling before foam disc polishing.
  • FlexPro 6" foam discs for large panels (hood, roof, doors); FlexPro 3" foam discs for mirrors, trim, A-pillars, and anywhere the 6" won't fit cleanly.
  • SpotFix 1-1/4" PSA discs are for individual dust nibs and runs — sand the defect only, not the surrounding panel. 100-pack for production use.
  • Scuff pads (SiC + AO, 20-pack) are reusable — use SiC pads for paint degloss and metal prep, AO pads for primer scuffing and plastic adhesion prep.
  • Sequence matters: scuff or wet sand first, then foam disc polish, then machine compound if needed. Skipping stages leaves scratches that show under gloss.

The finishing stages are where most paint jobs either succeed or get sent back. A dust nib that gets polished over instead of cut out shows up in direct sunlight. Orange peel that gets compounded without leveling first just moves the texture around. The products here are for doing it right — in the right order.

FastPlus fine finishing abrasives — foam discs, wet/dry sheets and spot repair

The Finishing Sequence

Step Product Grit / Grade
1. Surface prep before paint — degloss, adhesion Scuff Pads SiC + AO Ultra Fine / Very Fine
2. Wet sand clear coat to level orange peel BN38 SiC Wet/Dry Sheets 800–1500 Grit
3. Refine wet sand scratches BN38 SiC Wet/Dry Sheets 1500–2000 Grit
4. Foam disc polish — main finishing step FlexPro Foam 6" or 3" 2000 → 3000 → 5000 Grit
5. Spot repair — individual nibs and runs only SpotFix 1-1/4" PSA 2000–5000 Grit

The Full Lineup

⚪ Scuff Pads — Surface Prep & Degloss

Product Contents Use
Scuff Pads SiC & AO – 20 Pack 10x SiC Ultra Fine + 10x AO Very Fine Paint degloss, metal scuff, primer adhesion prep, plastic prep

Reusable — rinse with water or blow out with compressed air. Size: 6" × 9". No sander needed.

🟡 Wet/Dry Sheets — Clear Coat Leveling

Product Size Grit Range Use
BN38 SiC Wet/Dry Sheets – 10pcs 9" × 11" 80–2000 Grit Wet sand clear coat, orange peel removal, bare metal prep

Silicon carbide, waterproof latex-backed paper. Use wet with water for clear coat work at 800 Grit and above. Cut to any size for hand blocks or sanding sticks.

🟢 FlexPro Foam Discs — Polish & Correct

Product Size Grit Range Best For
FlexPro Foam Discs – 6" – 15pcs 6" / H&L 2000–5000 Grit Large panels — hood, roof, doors, fenders. Rupes LHR15 / LHR21, Festool ETS 150, Mirka DEROS
FlexPro Foam Discs – 3" – 15pcs 3" / H&L 2000–5000 Grit Mirrors, A-pillars, trim, tight spots. Festool RTS 400, Mirka DEROS 353CV, DeWalt DCW200B

3D pyramid SiC abrasive structure on flexible foam. Use after wet sanding — 2000 Grit to level, 3000 Grit to refine, 5000 Grit before machine compound or wax. Wet or dry.

🔴 SpotFix — Dust Nib & Spot Repair

Product Size Grit Range Best For
SpotFix PSA Film Discs – 1-1/4" – 100pcs 1-1/4" (32mm) / PSA 2000–5000 Grit Dust nibs, runs, small clear coat defects. Flex XCE 10-8, Rupes iBrid Nano LHR75E, hand block

Waterproof SiC film, PSA backing peels clean with no residue. 100-pack for production shops. Sand the defect only — not the surrounding panel.

From a Customer

"The FlexPro Fine Finishing Foam Discs are absolutely amazing! They deliver a smooth, high-gloss finish every time. The 6" disc is perfect for larger panels, while the 3" version is great for detail work around the trim and mirrors. These discs are my go-to for polishing vehicles to perfection!"

— James K., Professional Detailer

FastPlus fine finishing customer result

Shop All Fine Finishing Abrasives →

Frequently Asked Questions

01What is the correct order to use these finishing products?
The correct sequence is: (1) scuff pads for surface prep and degloss before painting, (2) BN38 wet/dry sheets at 800–1500 Grit to level orange peel in the clear coat after it cures, (3) BN38 at 1500–2000 Grit to refine the wet sand scratches, (4) FlexPro foam discs at 2000 then 3000 then 5000 Grit to polish out the sanding marks and build gloss, (5) SpotFix 1-1/4 inch discs for any individual dust nibs or runs that need spot treatment. Skipping steps leaves scratches visible under direct light.
02Can I use the FlexPro foam discs without wet sanding first?
Yes, if the clear coat surface is already smooth enough. If the clear coat has significant orange peel or texture, wet sand with BN38 sheets at 1000–1500 Grit first to level the surface before using foam discs. If the clear coat is relatively flat, you can start directly with FlexPro 2000 Grit foam discs.
03When should I use the 3" foam discs instead of the 6"?
Use the 3" foam discs for mirrors, A-pillars, door handles, trim edges, and any area where the 6" disc cannot sit flat. Use the 6" disc for large flat or gently curved panels — hood, roof, doors, and fenders. Both discs use the same 2000–5000 Grit range and the same 3D pyramid SiC abrasive structure.
04How do I use the SpotFix discs for dust nib removal?
Attach a SpotFix disc to a 1-1/4 inch PSA backing plate on a spot polisher (Flex XCE, Rupes iBrid Nano) or use by hand. Sand only the defect area with light pressure. Start at 2000 Grit for larger nibs, 3000 Grit for smaller ones. After cutting the nib flat, blend with 5000 Grit and polish the spot with a foam disc to restore gloss.
05Can the BN38 wet/dry sheets be used dry?
Yes. For clear coat and paint work, wet sanding with water is recommended at 800 Grit and above. For bare metal prep and primer sanding at 80–400 Grit, dry use is fine. The latex-backed paper holds up to water without delaminating or tearing.
06Do the FlexPro foam discs work with Rupes LHR15 and LHR21?
Yes. The FlexPro 6" foam discs fit the Rupes LHR15 and LHR21 directly via hook-and-loop. Use 2000 Grit for initial leveling, 3000 Grit to refine, and 5000 Grit before applying machine compound or finishing polish.
07Are the scuff pads reusable?
Yes. Rinse with water and let dry, or blow out with compressed air. The 20-pack includes 10 Silicon Carbide pads (ultra fine, for paint degloss and metal scuffing) and 10 Aluminum Oxide pads (very fine, for primer scuffing and plastic adhesion prep).

Source: FastPlus Abrasives USA — fastplus.us. All specs reflect FastPlus Abrasives USA product testing as of June 2026.